How to Fix the Laview Camera Blinking Blue Light?
Generally, Laview security cameras are the primary surveillance gadgets. These are equipped with the most advanced features but users sometimes complain about the Laview camera blinking blue light. However, this issue is very common and can easily be resolved by applying suitable troubleshooting tips.
In addition, the primary cause for the flashing blue light is that the surveillance device lost the connection and tried to reconnect to the internet. Further, if you want to explore more about the Laview camera showing blue light continuously, then must stay tuned to this page. Here, you find the root causes and easy troubleshooting tips to fix them.
Why is my Laview Camera Flashing Blue?
Moreover, you find that the most common reason for the blinking blue light on the Laview camera is network disconnectivity. Besides this, a few of the other reasons are mentioned below, have a look:
- Unstable wireless network
- Incompatible bandwidth
- The camera is out of the router’s network
- ISP issues
- Signal Interferences
- Technical glitches & bugs
- Enabled security extensions
- Power supply issues
How to Fix the Laview Camera Blinking Blue Light?
Furthermore, you now explore the reasons behind the camera flashing blue issue. Now, it is time to resolve these issues timely for the optimal functioning of the security device. In this section, we shed light on effective troubleshooting tips to fix these types of errors. So, let’s walk through this section once:
Stabilize the Internet Connection
Check that the wireless connection you use shows strong signal strength. If you have issues with the wireless internet, then use an ethernet cable to stabilize the network. This will easily fix the Laview camera flashing blue issue.
Check the Router’s Network Bandwidth
Confirm that your router’s network bandwidth is set to be 2.4 GHz. If your camera is not connecting to the home wifi or disconnects frequently, then you must visit the wifi settings of your camera, check the network settings, and set it to 2.4 GHz instead of 5 GHz. Also, enter the accurate admin password while connecting to the wireless network
Place the Camera Within the Router’s Network Range
Ensure your surveillance device is placed within the router/mesh’s network range. If it is out of the wifi range, then relocate it to the central location where signal strength is better and check if the Laview camera showing blue light error is resolved.
Contact Your ISP Authority
If the camera is flashing blue continuously or it is trying to reconnect but disconnects, then must connect with your ISP authority. They will guide you on whether there is an issue with the local network or if they restrict device access.
Eliminate Signal Obstructions
If there are network interferences present, then the Laview camera blinking blue light issue is common. Additionally, try to remove the signal barriers, such as mirrors, furniture, baby monitors, cordless phones, etc. If unable to remove these interferences, then relocate your security and networking gadgets.
Reboot the Camera & Base Station
To fix the technical glitches and bugs, it is necessary to power cycle the camera and base station. To do so, unplug the camera and the base station for 30 seconds and after that plug back the gadgets. Now, check if the flashing blue light error is resolved or not. Also, remove the SD card and reinstall it.
Disable the Security Extension on the Networking Device
If the security software are enabled on the router/mesh/extender,such as VPN/Firewall/Antivirus, etc., then Laview camera blinking blue light appears on your security device. Therefore, temporarily disable these security extensions until you complete the login or customization of your device.
Ensure Adequate Power Supply
If the camera lacks a power supply, then it can’t connect to the network and a blinking blue issue occurs on it. Hence, make sure wireless cameras are charged completely and the wired ones receive sufficient power supply. Check that none of the cords and an adapter are damaged and power outlets are working properly.
Final Words
All things considered, the given information will surely assist you in understanding and fixing the Laview camera blinking blue light issue. Additionally, you find the responsible reasons and easy troubleshooting methods to resolve this error on your camera. If you need human help, then connect with us here!
FAQs
Why is Laview Camera Blinking Red and Blue?
Primarily, if the Laview camera blinks red & blue, then it indicates that the camera is in pairing mode or setup mode.
Which LED Indicates the Proper Working of Laview Camera?
The solid blue LED on the Laview cam shows optimal functioning of it.
